heater set Autoterm Air2D/12V DELUXE URAL EDITION Landrover Defender TD5

Item number: TEX1911

Heizungskit Autoterm Air2D/12V Landrover Defender TD5 Kit wird von Tigerexped unter der Nummer im Katalog geführt.

Category: Heaters

753,51 €

including 16% VAT. , no shipping costs to: DE NL , shipping (Paket)

Available now

Shipping time: 3 - 4 workdays (within DE)

The Autoterm Air 2D (formerly Planar 2D) is a 2kW diesel air heater by Autoterm (Advers). It's a reasonably priced alternative to similar models bei Espar or Webasto, namely the Airtronic D2 or Airtop 2000. The kit contains everything you need for installation, including a control unit.

This heater is equipped with an automatic high altitude kit. That means, that the heater will automatically adjust the fuel injection quantities to the lower oxygen levels as air pressure decreases with altitude. The sooting of the burn chamber can therefore be drastically minimized. Note: Of course the maximum achievable power reduces proportionally to the amount of oxygen in the air. The algorithm employed is a little more sophisticated, but roughly speaking, you loose about 5% of power for every 500 meters above 2000m.

Our own tests up to 3440m went flawlessly, we think up to 4000m no major problems should occur. The software itself calculates injection quantities even in 5000m altitude, but this setting has only been tested at lower altitudes. So while in theory a consistent burn should be achievable, we have no real world feedback on this. Yet.

Important: Running a heater at high altitudes requires very well running fans. That means, best there are no hot air ducts connected to the heater, exhaust and burn chamber inlet need to be as short as possible. The least resistance on all these ducts, the more freely the fan can spin, the more air it can shovel into the burn chamber. Please keep that in mind!

In any case, please note: High altitudes will always be met with a technical compromise of some sort. For longer periods of time (e.g. weeks vs. days) you will need to care for getting the burn chamber up to temperature. If that is not possible, sooting in burn chamber will slowly occur anyway - just as with heaters that are being used only on lowest power setting even at zero altitude. So whatever you do, just as has been the case until now: No warranty for sooted up burn chambers. There never was and there will never be, not even with high altitude kit.

Therefore please let the heater regularly burn at highest power setting, preferably at low altitudes. Generally, for all use cases, that means at least every 1-2 weeks for half an hour on full power, to get rid of any carbon buildup that might have occurred. That is about all you have to do in terms of service to a Diesel heater.

For those very rare special special cases with weeks long stays at altitudes above 4000 meters we guess a burn chamber clean up should be feasible when problems start to occur.

The digital control unit allows for power level control or temperature control. There is also a lead for external switches or self-made remotes. You can also attach an optional temperature sensor for more accurate temperature control. Menu currently only available in English and Russian language.

All Planar heaters are (e2) mark certified allowing installtion in all vehicles within the European Union without consulting TÜV or MOT offices (or whatever they are called in your country.... ;)) Please note: The mounting holes etc. are identical to Espar, so you can simply replace one of those without having to modify anything.

Technical data:

  • Operating voltage: 12V
  • Heat output: 0.8kW (min), 1.8kW (max)
  • Fuel efficiency: 0.1ltr/hr (min), 0.24ltr/hr (max)
  • Power rating: 10W (min), 29W (max)
  • Air flow: 34m³/h (min), 75m³/h (max)
  • hot air hose 60mm system

Packing list:

  • Heater 12V
  • digital control unit PU-27 (cable length 1.8m)
  • fuel pump "Thomas Magnet P327 or P0636"
  • fuel pump rubber mounting bracket
  • wiring harness fuel pump
  • wiring harness heater
  • air intake hose with silencer (17 x 9 x 5 cm)
  • heat protection sleeve
  • fuel intake pipe
  • 5.5m plastic fuel line
  • 300mm universal rubber fuel line connection
  • 1m exhaust pipe, flexible
  • stainless steel exhaust silencer  (17 x 9 x 5 cm)
  • nuts bolts, shrink tube, cable ties, ...
  • manual

additionally for Defender-Kit:
    0,3 m air duct
    Webasto air outlet
    Cubby Box
    installation plate
    fuel intake pipe Landrover Defender 90/110/130 Td5 2.5, Td4 2.4 und Td4 2.2
    air intake hose with filter
    fuel filter

Dimensions heater:

  • Length: 33cm
  • Height: 12cm + 2.5cm connectors
  • Depth: 12cm

Weight of bare heater: 2.86kgs

Dimensions Cubby Box:

Length: 47,5cm
   Height: 26,5cm
   Depth: 15,5cm

Weight of Cubby Box inkl. installation plate: 6,5kg

Frequently Asked Questions are to be found with just one klick here .

Product weight: 10,74 kg
Average product review

Write your first review and help others with their purchase decision:

Other customers also bought the following items

Mounting Flange EVO for Air Heaters in walls/floors up to 48mm, stainless steel

58,44 € *
Available now

99% Camper: Das Heizungskit 2kW / 12V

starting from 583,90 € *
Available now