- Spacer Spring bridge 165 mm x 70 mm thickness 6 mm, two holes with a diameter of 22mm offset 25mm ul> Description strong>
Using spacer spring-bridge can be done " budget "lift spring can be compensated mashiny.Takzhe" sagging "springs to replace them or to increase an existing elevator, as well as to align the car if it is piled high on one side due to sagging springs (only for vehicles with leaf springs on the bridge).
Note: For the installation of spacers packet generally requires a greater length of the ladder (depending on the height of the package spacers). For GAZ Sobol has lengthened ladder UB974.
The spacer spring bridge is made of steel with a thickness of 6mm, allowing you to dial the desired height spacers package for a specific size increments 6mm. Spacers are not painted, which allows them to be welded to each other without the need for additional treatment. Coloring is carried out after assembling the required height spacers package.
In the center of the spacer spring-bridge has a hole. Once typed the necessary adjustment shims pack into this hole is inserted a rod PLR-G1 and cut to size spacers package. Welded pack of shims. Produced coloring
Note:. Weld rod is not!
If you are installing the springs on the central bridge coupling bolt spring spacers included in the package and pushes the rod into the opening of the bridge, thus centered the whole structure.
These spacers are 2 holes with a diameter of 22mm, which allows you to lift and at the same time to produce the offset of the bridge on 25mm.
The advantages and disadvantages compared to aluminum spacer strong>
- The advantages:. The possibility to choose the right height for the right and left sides (thus compensated for different height of the car on springs), aluminum spacer strongly corrodes when in contact with steel-spring steel after painting practically not subject to corrosion at the steel spacers greater strength.
- Disadvantages: greater weight ul>