The Company offers Avtoventuri deflyator- "automatic". It is a cap screwed on nipple tire. Located inside the valve: a rod with a spring. an adjustable valve closing force and begins between 0.2 kgf / cm2 & # 40; bar or atm # 41 & ;, which corresponds to 2,9 psi
pressure reduction process with this device is very simple. cheat instead of standard cap pin deflator and wait. When the air outlet stop & # 40; longer hear the hiss ;, 41 & # - pressure reaches the desired value. Multiple test gauge in the process is no longer necessary pressure reduction and pressure reduction itself does not even require your attention.
In order to set the desired value to which you plan to reduce the pressure in the tire deflator need Tare. Weaken the lock nut and screw in the nipple deflator. When the hissing stops, that is, air will go out, remove the pressure gauge and deflator are measuring tire pressure. If the pressure is higher than desired - unscrew the top cap deflator if below - twist and wheel booster. Repeat the process as long as the pressure in the tire will not fit the needs. Firmly fix the cap locknut deflator - the device is ready to use
In order to accelerate the process of reducing the pressure on all wheels is recommended to have two or four deflator -.. For each of the wheels, respectively, motorcycle or car / ATV
Move with the sound around on is not recommended nipple deflators on the road - in the case of failure of the nipple to nipple, most likely, this valuable device will be lost. Therefore, in order not to lose time waiting, we recommend advance for a couple - three kilometers from the exit of the hard coating, in a convenient parking spot set deflators on the nipples of the wheel and keep going. The pressure in all tires to take the desired value itself. Enough before the exit of the road or the lasting soil substitute deflators back to the nipple caps.
And before returning to solid ground do not forget to return the tire pressure with the help of the staff of the compressor!