Planar 2D BASIC URAL EDITION Diesel air heater 2kW 12V incl. high altitude kit, control panell and mounting kit

Item number: 18184

Powerful 2000W diesel air heater for 12V applications, includinga fully fledged  full mounting kit. Ideal for RVs/Campers, smaller boats and transporters.

Category: Air Heaters


starting from 499,00 €

including 19% VAT. , no shipping costs to: DE NL , shipping (DHL)

Available now

Shipping time: 1 - 3 workdays



mounting accessories heaters
  • NEW: EVO version with optimized thermal insulation between mounting bolts and flange!

    While the average air heater can ony be mounted in floors/walls up to around 48mm thickness, we have developed a mounting flange to facilitate mounting in thicker floors or walls.
    Our flange can bridge up to 48mm and does not require tedious cutting of holes for exhaust, air, fuel and mounting. Instead, a single rectangular cutout of roughly 88x130mm size is sufficient to mount the heater.

    Stainless steel, laser cut, welded, partially glas bead blasted.

    Fits Planar air heaters 2D, 4D and 44D and most Eberspächer heaters with the same flange dimensions as Planar. Possibly Webasto aswell.

    Registered Community Design!
  • Flansch zum Einbau von Standheizungen für Böden mit bis zu 83mm Stärke.
  • Stabiler 90° Winkel zur Montage von Luftstandheizungen an Wand oder Boden.
  • Stainless steel mounting bracket for the installation of parking heaters on the floor or on the wall, especially for yachts or boats.
    Suitable for Planar, Autoterm, Eberspächer and Webasto.

Zusatzoptionen Heizung
  • Fuel tube tee, 5,3 x 5,3 x 5.3 mm. Suitable for PLANAR 2D, PLANAR 4DM, PLANAR 44D air heaters and BINAR engine pre-heaters.

  • Fuel tube tee, 8mm*5,3mm*8mm. Suitable for PLANAR 2D, PLANAR 4DM, PLANAR 44D air heaters and BINAR engine pre-heaters.

  • Verlängerungskabel mit 3,5m-Länge für das Bedienelement der Planar Heizungen 2D, 4D und 44D.

  • Ein Temperaturfühler ermöglicht in Kombination mit dem PU-5 Drehregler (BASIC) die Temperaturregelung. Mit dem PU-27-OLED-Display (DELUXE) lässt sich so eine genauere Temperaturmessung oder sogar das Einrichten einer zweiten Heizzone realisieren.
  • Air intake / intake hose for the auxiliary heater with dust filter to get clean air into the combustion chamber.

  • You can use the modem to set and operate all functions of the heating with your smart phone
Your configuration

The Planar 2D is a 2kW diesel air heater by Planar (Advers). It's a reasonably priced alternative to similar models bei Espar or Webasto, namely the Airtronic D2 or Airtop 2000. The kit contains everything you need for installation, including a control unit.

The analog control unit allows for power level control. There is also a lead for external switches or self-made remotes. You can also attach an optional temperature sensor to switch to temperature control.

This heater is equipped with an automatic high altitude kit. That means, that the heater will automatically adjust the fuel injection quantities to the lower oxygen levels as air pressure decreases with altitude. The sooting of the burn chamber can therefore be drastically minimized. Note: Of course the maximum achievable power reduces proportionally to the amount of oxygen in the air. The algorithm employed is a little more sophisticated, but roughly speaking, you loose about 5% of power for every 500 meters above 2000m.

Our own tests up to 3440m went flawlessly, we think up to 4000m no major problems should occur. The software itself calculates injection quantities even in 5000m altitude, but this setting has only been tested at lower altitudes. So while in theory a consistent burn should be achievable, we have no real world feedback on this. Yet.

Important: Running a heater at high altitudes requires very well running fans. That means, best there are no hot air ducts connected to the heater, exhaust and burn chamber inlet need to be as short as possible. The least resistance on all these ducts, the more freely the fan can spin, the more air it can shovel into the burn chamber. Please keep that in mind!

In any case, please note: High altitudes will always be met with a technical compromise of some sort. For longer periods of time (e.g. weeks vs. days) you will need to care for getting the burn chamber up to temperature. If that is not possible, sooting in burn chamber will slowly occur anyway - just as with heaters that are being used only on lowest power setting even at zero altitude. So whatever you do, just as has been the case until now: No warranty for sooted up burn chambers. There never was and there will never be, not even with high altitude kit.

Therefore please let the heater regularly burn at highest power setting, preferably at low altitudes. Generally, for all use cases, that means at least every 1-2 weeks for half an hour on full power, to get rid of any carbon buildup that might have occurred. That is about all you have to do in terms of service to a Diesel heater.

For those very rare special special cases with weeks long stays at altitudes above 4000 meters we guess a burn chamber clean up should be feasible when problems start to occur.


All Planar heaters are (e2) mark certified allowing installtion in all vehicles within the European Union without consulting TÜV or MOT offices (or whatever they are called in your country.... ;)) Please note: The mounting holes etc. are identical to Espar, so you can simply replace one of those without having to modify anything.


Technical data:

  • Operating voltage: 12V
  • Heat output: 0.8kW (min), 1.8kW (max)
  • Fuel efficiency: 0.1ltr/hr (min), 0.24ltr/hr (max)
  • Power rating: 10W (min), 29W (max)
  • Air flow: 34m³/h (min), 75m³/h (max)
  • warm air hose 60mm system

Packing list:

  • Heater 12V
  • digital control unit PU-5 (cable length 1.8m)
  • fuel pump "Thomas Magnet P327"
  • fuel pump rubber mounting bracket
  • wiring harness fuel pump
  • wiring harness heater
  • air intake hose with silencer
  • heat protection sleeve
  • fuel intake pipe
  • 5.5m plastic fuel line
  • 300mm universal rubber fuel line connection
  • 1m exhaust pipe, flexible
  • stainless steel exhaust silencer (17 x 9 x 5 cm)
  • nuts bolts, shrink tube, cable ties, ...
  • manual


Dimensions:

  • Length: 33cm
  • Height: 12cm + 2.5cm connectors
  • Depth: 12cm

Weight of bare heater: 2.86kgs

Frequently Asked Questions are to be found with just one klick here .


Product weight: 6,20 kg
Average product review

Write your first review and help others with their purchase decision:

Product review

Accessoires
Mounting Flange EVO for Air Heaters in walls/floors up to...

Mounting Flange EVO for Air Heaters in walls/floors up to 48mm, stainless steel

59,95 € *
Available now
Mounting Flange Air Heaters EVO  for walls/floors up to...

Mounting Flange Air Heaters EVO for walls/floors up to 83mm, stainless steel

65,00 € *
Available now
Planar External Temperature Sender for 2D, 4D, 44D

Planar External Temperature Sender for 2D, 4D, 44D

20,95 € *
Available now
Planar air duct 60mm

Planar air duct 60mm

11,95 € *
11,95 € per 1 m
Available now
air duct T, 60mm

air duct T, 60mm

11,95 € *
Available now

Other customers also bought the following items
Planar air duct 60mm

Planar air duct 60mm

11,95 € *
11,95 € per 1 m
Available now
Mounting Flange EVO for Air Heaters in walls/floors up to...

Mounting Flange EVO for Air Heaters in walls/floors up to 48mm, stainless steel

59,95 € *
Available now
Fuel tube tee, 8mm*5,3mm*8mm

Fuel tube tee, 8mm*5,3mm*8mm

2,95 € *
Available now
air duct T, 60mm

air duct T, 60mm

11,95 € *
Available now
Mounting Flange Air Heaters EVO  for walls/floors up to...

Mounting Flange Air Heaters EVO for walls/floors up to 83mm, stainless steel

65,00 € *
Available now